Aaron,
I suspect that the firmware is not recognizing that the KAT2 is not present.
Make certain that all wires to the KAT2 board are present and well soldered.
It also could be that the KAT2 firmware has failed.
73,
Don W3FPR
On 1/12/2022 8:24 PM, Aaron K5ATG wrote:
This evening I tried to get into the menu on my K2 and pushing or
holding the MENU/EDIT button does nothing at all. When I press the ANT
1/2 Button it switches from Antenna 1 to Antenna 2. However, when I
hold the button to tune with the internal ATU the display LCD just
shows Atu and the bar graph goes completely blank. This is the first
time that it has done this and it has been working just fine until
now. I'm not sure how to remedy this.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
