The K4 is accessible through telnet on port 9200.
No security.
It is always a good idea to have security but I would prefer to have the
telnet without security and put the security in the network.
Make sure you have a good firewall between the internet and your radio
equipment. Dont trust your internet provider. Always put a firewall
between your internetprovider firewall/router en your home network.
73 Henk PA5KT
Op 8-2-2022 om 21:03 schreef Magnus Danielson via Elecraft:
Dear all,
I have tried to look at the K4 Programmers manual, and it remains
fuzzy on how one should connect to the K4 on the Ethernet port. All
the commands is wonderful to have, and that part is nicely documented.
I understand that the real time streaming parts is not done yet, but
just being able to do the normal commands would be a step in the right
direction.
I do hope that there is fair security of SSH/TLS level, as we run this
over network. For real-time streaming, look at RIST.
Cheers & 73,
Magnus SA0MAD
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
