Hi Josep,
You might try running the Transmitter Gain calibration procedure which
is in the Elecraft K3 Utility Program. You must have a good dummy load
to do this, but otherwise it is all automatic. You just follow the
prompts from the program.
73,
Victor, 4X6GP
Rehovot, Israel
CWops #5
Formerly K2VCO
https://www.qsl.net/k2vco/
On 21/04/2022 20:48, Josep Torres via Elecraft wrote:
Hi buddies,
Just a quick question regarding a reduction of power in some bands
only. It runs 100w in higher bands, but when I go down to 30, 40 and
80, it looks like it only sends ~60/70 watts. What can be the
reason.? I have read that a Hi SWR is cause of that, but when I use
the tuner, K3 doesn’t say Hi SWR, so I don’t know what can cause
that, any ideas..?
Thank you.
73,
Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724)
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:[email protected]
This list hosted by:http://www.qsl.net Please help support this email
list:http://www.qsl.net/donate.html Message delivered
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
