Hello John, Tha is not possible. ANT2 connecter and antenna switching function are provided with KAT3 ATU.
I have 3 antenna feed lines. To switch the antennas according to K3 band selection, I use KAT500 ATU which has 3 SO-239m connecters. Of course my K3 does not have KAT3 option. 73 de JH3SIF, Keith > 2022/05/05 9:33、John Stengrevics <[email protected]>のメール: > > I have a K3S without antenna tuner. Is there any way to enable ANT2 to use > a different antenna than ANT1? For example, I have a 6 meter antenna > connected to ANT1 and would like to use ANT2 for a 10 meter antenna. From > what I am reading in the manual and Cady’s book, this doesn’t seem possible. > > Thanks. > > John > WA1EAZ > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
