Dave,
Disconnect pin 1 of your built adapter.
73,
Don W3FPR
On 5/27/2022 3:46 PM, Dave Sublette wrote:
Sorry... I forgot to say that I am using a short adapter cable, DB9-M to
DB-9F that eliminates all wire connections except for pins 1,2,3, and 5,
per instructions in the K2 Manual. It is new. I just built it and it
checks out with an ohmmeter.
FYI This K2 has talked to this computer before, but has been through a
recent repair cycle. The KUSB cable might be bad, but until I get
schematics or voltage table data, I have no way of knowing. As I said
before, the DB-9 connector on the KUSB cable does get warm like there is
something at work in there.
Thanks,
Dave, K4TO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w3fpr.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
