Should there be advertisings in a mailing list?
> Am 07.06.2022 um 23:01 schrieb Keith Ennis via Elecraft > <[email protected]>: > > KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 > and KPA1500 > > > Digital Display Unit for Elecraft's KPA500 amplifier: > - > - > WITH REPAIR COST AND DOWN TIME FOR REPAIRS, THIS WILL KEEP YOU INFORMED OF > HOW YOUR AMP IS DOING. > - > - > Instead of seeing only 1 crucial reading, monitor all 7 at the same time. > 1. Power amplifier's heat sink temperature > 2. Power amplifier's high voltage supply voltage > 3. Power amplifier's current > 4. Power amplifier's output power > 5. SWR that the KPA500 sees at its output > 6. Displays Operate/Standby mode > 7. Displays Band amp is tuned to > - > KEEP AN EYE ON YOUR KPA500'S STATS! BEFORE SOMETHING HAPPENS! > - > - > Digital Display Unit for Elecraft's W2 Watt Meter: > > > The digital read out on the Display Unit takes the guess work out of the LED > light bars. > > - > Digital Display Unit for Elecraft's KXPA100 amplifier: > - > Don't wait for a fault light to come on. Keep an eye on 5 crucial readings > at all times. > > 1. Power amplifier's heat sink temperature > > 2. Power amplifier's high voltage supply voltage > 3. Power amplifier's current > 4. Power amplifier's output power > 5. SWR that the KXPA100 sees at its output > - > - > > - > Digital Display Unit for KAT500: > - > This unit displays the front panel settings. > > If the tuner is in bypass or not. > > Displays the capacitance and inductance used. > What type of circuit is used. LC or CL. > SWR of both before and after a tune cycle is completed. > - > - > Digital Display Unit for Elecraft's KPA1500 amplifier: > > Displays the same display that is on the KPA1500 Amplifier > > > Change the display on the KPA1500 and the display changes to show this same > screen > > - > - > All of the Digital Display Units: > - > Display Unit can be located at a more visible location > > Up to the RS232 limit from unit > > - > Easy to read 2 line display > > No USB or serial cable to computer > > > No com port in Windows to manage > > > No computer needed > > > Plug and Play > > > Simply connect the SUPPLIED dc power cable (with inline on/off switch) from > the DDU to power supply and SUPPLIED SERIAL data jumper cable to the device > > > Retains all functions of the front panel > > > All displayed info obtained directly from the device > - > Only 4" x 4" x 2" > - > For more information and ordering go to: http://www.kv5j.com/store > > Reviews: > > > https://www.eham.net/reviews/view-product?id=14701 > > - > https://www.eham.net/reviews/view-product?id=14820 > > > > $119.99 plus shipping > > > Keith, KV5J > > > http://www.kv5j.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
