Right. But FIRST set TXEQ to max cut for the first three bands, 6 dB cut
on the 4th band, 3 dB boost on 2.4 kHz, 6 dB boost the top band (3.2
kHz). Then set COMP as Bob described. The TXEQ settings prevent wasting
transmitter power with speech components that don't contribute to speech
intelligibility. This was learned by AT%T Bell Labs nearly a century ago.
73, Jim K9YC
On 7/1/2022 9:21 AM, Ed Cole wrote:
Start with COMP at 0, adjust the MIC gain while speaking normal voice to
attain 5 to 6 bars {no more} as indicated on the ALC meter.? Then adjust
the COMP for a value to indicate about 10 on voice peaks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
