"I though Elecraft wanted HV to be kept at or above 60 to avoid unacceptable
IMD. No sure where I found that but don't think I imagined it. "
The problem with making measurements is that one may not like the results.
It's a nice warm afternoon here in Glendale AZ and I expect every air
conditioner in the street is running. Line voltage is down to 116.4 and loaded
HV is well below 60 now.
1:13:59.663 KPA Mon frozen
TX freq = 50314500 Hz
Drv pwr = 027 W
Pwr meter = 12 dots
KAT SWR = 1.18
KPA SWR = 01.2
PA voltage = 56.8 V
PA current = 13.7 A
PA input = 778 W
RF out = 495 W
PA diss = 283 W
PA effic = 63%
Andy, k3wyc
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
