I have suffered the very same failure but on my K3. Despite extensive attempts on my part, removing the dislodged tip has proven futile and it appears that the female jack will need to be replaced. Removing it might help but it’s just too finicky for me.
Chris Cox, N0UK [email protected] https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w > On Jul 18, 2022, at 07:30, Douglas Speer <[email protected]> wrote: > > I received my Ship Group 3 Elecraft K4; in the middle of an across country > move. So it remained in the box until this past weekend. While setting up, > in error I plugged my 1/4” tip/ring/ground paddle connector into the 1/4” KEY > Jack on the back of the rig instead of the correct PADDLE jack. When I pulled > the plug out of the KEY jack, the tip of the 1/4” plug broke off and is now > lodged inside the KEY jack. > > It looks as if I will need to open the cabinet in order to extract the tip > piece. I can’t find any online photos of an open K4. Looks as if I should > open the top. Has anyone out there had the top cover off? Any advice or > precautions I should be aware of? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
