I built something like that using two 2 pole 4 position wafer switches to
switch between 4 radios. One switch is for the input, and the the other for
the audio output. I also put a 2 pole 2 throw toggle switch in the audio
output to switch between phones and a small audio amplifier driving a spkr. You
can see it in my QRZ.com photo mounted under the shelf below the Daiwa meter.
W7HV
On Sunday, July 24, 2022 at 06:40:54 AM MDT, Joe Subich, W4TV
<[email protected]> wrote:
On 2022-07-23 9:34 PM, Brian Hunt wrote:
> Pretty simple home brew project, I would think. Four stereo jacks, a
> DPDT switch, a small box and a capacitor should do it.
It would take a four pole double throw (mic, PTT, L Audio, R Audio)
or two DPDT switches.
73,
... Joe, W4TV
On 2022-07-23 9:34 PM, Brian Hunt wrote:
> Pretty simple home brew project, I would think. Four stereo jacks, a DPDT
> switch, a small box and a capacitor should do it. The capacitor is to block
> the mic bias from going to the Signalink. You would still likely have to
> adjust levels whenever switching. Would take some study to get all the
> connections right.
>
> 73,
> Brian, K0DTJ
>
>> On Jul 23, 2022, at 17:29, Andrew (A.J.) Stockton via Elecraft
>> <[email protected]> wrote:
>>
>> You can check out a few on Amazon - common one headset between computer for
>> web calls and second for gaming systems
>>
>> Nobsound Little Bear MC1023 2-Way Audio Microphone Headset Speaker MIC
>> Switcher Headphone Switch Hub Volume Control Controller Selector 3.5mm RCA
>> https://a.co/d/7lg6yyp
>>
>> A.J. Stockton
>>
>>> On Jul 23, 2022, at 7:33 PM, James Bennett via Elecraft
>>> <[email protected]> wrote:
>>>
>>> For sure - I’d like to switch my Yamaha CM-500 headset between my K4D and
>>> an Icom IC-705. I currently have to use two separate headsets - a PITA to
>>> say the least.
>>>
>>> Jim / K7TXA
>>>
>>>>> On Jul 23, 2022, at 5:26 PM, Julia Tuttle <[email protected]> wrote:
>>>>
>>>> I would be interested in such a gadget too! And it's not (just) lazy, it
>>>> also saves wear on the jacks. :)
>>>>
>>>>> On Sat, Jul 23, 2022 at 1:49 PM <[email protected]> wrote:
>>>>>
>>>>> Is there a product, some kind of a little box, that allows me to quickly
>>>>> switch the KX3 mic/phones between SignaLink and my mic and speakers ?
>>>>>
>>>>> I know it sounds lazy !
>>>>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
