Pat, If this condition is confined to 40 meters, check out the KPA100 specific information regarding the position of RFC10 (the one soldered to the antenna jack) on Tom Hammond's website www.n0ss.net .
If it happens on all bands, then you have another problem, so ask again and provide more information and we can lead you on a path of 'problem chasing'. First you will have to tell us whether the 'wattmeter' you refer to is an external wattmeter or the internal K2 indication. 73, Don W3FPR > -----Original Message----- > > Having problems with my kpa100 not tracking power with respect to > the power > knob on the K2. For example on 40m if the K2 says 40w the wattmeter shows > 100 watts and the current meter on the power supply confirms the > latter with > ~18 amps. > > The leads me to suspect the power control circuit, but I'm unfamiliar with > its operation. > > Any help would be appreciated. > > Pat N8vw > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
