New K4 seems to transmit fine in CW and SSB -voice. But I cannot get
more than a 2 watt TX power out reading in AFSK.
N1MM+ w MMTTY used for generating AFSK RTTY signal.
Using the USB to PC patch between computer and K4.
Audio TX RTTY signal is heard in K4 monitor.
PTT line functions (TX light goes on).
Low level rtty signal is heard on another rig in shack.
Under "menu", Serial USB-2 DTR is set to CW; RTS set to PTT.
Rig control by N1MM+ seems to be working properly.
But, CW sent from N1MM+ does not key K4 in cw mode.
I imagine I am doing something stupid; I've done it before.
Thanks for any advice.
73, Dave, K2YG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
