I have the span "sticking" at 30 kHz when I change bands, but the center frequency is changing with the P3 in fixed-tune mode.
I've tried the macros stored in the P3 and, just now, macros in VA2FSQ's Win4K3Suite, but the center frequency doesn't stick. https://va2fsq.com/ For instance, I want to see 7020-7050 with the center frequency of 7035. I set that either with the buttons on the right side of the P3 or a macro, change bands to 80 and then go back to 40, and the center frequency has changed to 7040, so the span is 7025 to 7055. It's not a huge problem, of course, just a bit frustrating. 73, Jim N7US -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Victor Rosenthal Sent: Friday, August 12, 2022 00:30 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] P span retention I also recall this problem. I am thinking that if you set them by a CAT command they might not be remembered. You need to make a small change manually to cause it to save them. I might be all wet, but it's easy to try it and see. 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco/ On 12/08/2022 4:42, Jim McDonald wrote: > Not a new question, but I don't remember the answer. I think the P3 > should remember the span and center frequency on each band, but my P3 > is forgetful. > > Is there a fix? > > 73, Jim N7US > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
