For FT8 on my KX-3 I didn't use a Signalink for years. When I was
having trouble with Winlink, a ham friend suggested I use a Signalink.
Didn't I need it?
david, KC1DNY
On 8/20/2022 10:12 AM, Neil Zampella wrote:
You really don't need a Signalink to do digital modes and the KX3. All
you need is a good USB sound card, the audio cables for Tx & Rx
(Stereo), and the KXUSB cable for CAT control.
The setup is described in Cady's KX3 book.
Neil, KN3ILZ
On 8/15/2022 6:10 PM, k2vjk wrote:
I called Tigertronics the other day and asked them about a SignaLink
USB and the bias voltage on the mic for the KX3. A lady called me
back later in the day and told me that she has something to read to
me that she didn’t understand. She said the tech department said that
if you are using their jumper plug, that it has a blocking capacitor
in it, so the bias voltage is ok. If you wire your own jumpers, you
will have to disable mic bias. She said she didn’t understand what it
meant, but the tech department said that I should know what it means.
And I do. I’ll be checking the SignaLink jumper plug I have this week
and let you know if this is the case. Jst a little info…..
Sent from Mail for Windows
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
