Thanks, Kent - that's what I thought, but it doesn't seem to be
working. I generally use the internal tuner, and I was hopping around a
lot within bands, but unfortunately I didn't collect data on which hops
produced warnings - either excessive current warnings or over-power
readings on the LED scale.
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
On 11/6/2022 9:29 PM, K9ZTV wrote:
Pete ...
You have to first set the drive manually per-band on the K3. Once that is done,
the K3 adjusts its drive to whatever you have set it to when changing to that
new band.
73,
Kent
K9ZTV
On Nov 6, 2022, at 7:05 PM, Pete Smith N4ZR<[email protected]> wrote:
Just finished SS, and on many occasions when switching bands I found myself
overdriving the KPA-1500 on the new band. No harm done, but I thought the
K3/KPA-1500 combination was supposed to manage drive on a per-band basis. Did
I get that wrong?
--
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
______________________________________________________________
Elecraft mailing list
Home:http://mailman.qth.net/mailman/listinfo/elecraft
Help:http://mailman.qth.net/mmfaq.htm
Post:mailto:[email protected]
This list hosted by:http://www.qsl.net
Please help support this email list:http://www.qsl.net/donate.html
Message delivered [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
