It isn't a matter of if your K3s will fail, it is a question of when.
The radio's current sense resistor (SMD 1206) is rated at 1/2 watt,
while (depending on options) will dissipate nearly 2 watts at 10 watt
transmit. It took several years but my resistor drifted from 0.05 ohms
up to 0.068 ohms triggering HI CUR errors whenever I turned on the sub
receiver. I am glad it didn't unsolder itself. I did this write up on
the web.
http://k9jm.com/K3sCurrent/ElecraftHiCur.html
Note: The original K3 has a higher wattage current sense resistor and
should be fine.... they cheapen the K3s
73 de
Jim K9JM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
