Thank you for all your responses. I did not mean my question to solicit the 
thousands of ways of solving this problem, but merely a poll of hams' 
experiences running high power. Based on all of the private and public 
responses I received, it's about 50% who've had problems with consumer 
equipment and high power.

If the problems are caused by simple RF overload of the piece of equipment, 
I've never understood why balanced or unbalanced antenna systems make any 
difference. If your 1500 W signal induces a large interferer on the circuitry 
of your internet modem or garage door opener, the device has no idea whether 
you're using a Yagi or a dipole or a vertical or whatever. It's just being 
overloaded because it's in the near field of the antenna and has very poor 
rejection and filtering. You could have the best-balanced antenna system in the 
world and still get into a poorly-shielded modem, couldn't you? The 
interference isn't coming in through the wires, it's coming in through the air!

I tend to resonate with K9YC's assertion that there are a whole lot of devices 
out there that are designed badly, susceptible to the slightest overload. When 
I look at my own situation I notice that I have tons of devices that were 
completely unaffected. My telephones, lights, garage doors, overhead fans, 
smart thermostat, and many others-- all of which have RF circuitry to one 
degree or another-- were never bothered.

Taking the FM radio in the kitchen as an example, you could make the argument 
that since its whole purpose in life is to receive weak signals, that it's 
particularly vulnerable to a large HF signal. But not a single person mentioned 
that they've ever heard themselves coming through their FM radio. I must have 
the only cheap table radio in America!

Anyway, I envy those of you who told me, "I haven't the slightest idea what 
you're talking about." 

R,

Al  W6LX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to