Hi everyone,
I've been working with Gary at Elecraft on a problem getting the
K60XV to work. Wanted to see if anybody had a similar experience or
has advice.
I was getting a resistance reading between pins 13 and 14 of U1 on
the K60XV at 99 ohms...it's supposed to be in the megohm range,
apparently.
The reading was probably thru a cap (C12?) because it started at zero
and slid up to 99 ohms.
When connected to the K2, I get the ol' "INFO 080".
After removing U1 from its socket, I still get 99 ohms between pins
13 and 14.
I removed C12...still 99 ohms
I removed R1...now open.
Any ideas?
John
AB8O
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
