Big thank you to Hank K4HYJ who mentioned Data A is a little different from SB when it comes to the XMIT function. I believe I’ve been operating PSK in USB till now, and just… put it into Data A mode. Changing the Mike PTT to off fixed it in Data A mode, and it works as usually in USB mode.
I really appreciate this group. I don’t often reach out, but every time I do, I get the right answer in a matter of hours. I do have a follow up question. I will start a new thread on that. On Tue, Jan 24, 2023 at 12:12 PM John Overbaugh <[email protected]> wrote: > I have a KX3, running through the KXPA100, connected via Serial USB to > a Windows 10 machine. I'm using Win4k3 2.0.4.0 and com0com to share > out the COMPort. I have N3FJP's Amateur Contact Log running, as well > as FLDIGI v 4.1.18 in normal mode. > > When I run a macro in FLDIGI, the macro engages the XMIT mode, sends > the data via PSK, and disables TX mode, and I can hear a switch flip > in the KX3, but 1) the transmit light is still red and 2) there is no > RX. If I manually press the XMIT button, the light goes off and RX > begins again. > > This is a new development which started earlier this morning as my > Elmer was running PSK for VOTA (W1AW/7). No apparent changes were made > to configuration. > > I've reviewed the Cady book on PSK settings, and double checked > connections from the KX3, Signalink, and KXPA. No obvious issues. > > Has anyone seen this in the past? > > 73 de K7JTO > John O. > Salt Lake City UT USA > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
