I had something similar on my KAT-500 where I could not get to antenna connection 3.
What I did was to do the update of the software and then open it to manually turn on antenna 3 and it was fine. I have the cable if you need to do that. On Tue, Mar 21, 2023 at 11:45 JK Hooper via Elecraft < [email protected]> wrote: > Hi all, > > Despite my making what-I-think are appropriate changes in the KAT500 > utility (MacOS version), I am not able to switch antennas for 6 meters (50 > MHz). KAT500 always stays on Antenna 3. > > My work-around solution has been to put my antenna w/ 50 MHz capability on > Antenna 3. > > Any opinions on why my KAT500 is not responding to antenna changes, either > from the front panel or from the KAT500 utility? > > I have restored factory defaults; no change. I have restored from saved > configuration file (which appears ok) and no change; still on antenna 3. > > Configuration: K4D, KPA500, KAT500 with Elecraft interconnect cables. > > Thanks in advance, > > 73 > Hoop > K9QJS > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- 73 de Ted Edwards, W3TB and GØPWW and thinking about operating CW: "Do today what others won't, so you can do tomorrow what others can't." ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
