Thanks, I’ll check the link. Ah, that is a link to the post on Yahoo! Groups, 
but Yahoo! shut all that down and didn’t even leave the archives live. Sigh. 
I’ll try and find it elsewhere.

It looks like I reposted his 2012 post in 2014, so maybe I’ll link to that.

https://elecraft-kx.groups.io/g/main/message/46148?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C0%2Ckk7p+mic+bias%2C20%2C2%2C0%2C35006985

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On May 17, 2023, at 8:35 AM, Hank <h...@optilink.us> wrote:
> 
> I went back and re-read you article. I had made a setup for my KX3 a few 
> years back and couldn’t remember all of the details. Thanks for reposting!!
> 
> BTW, Lyle’s article you mention, the link is dead. It was a great resource if 
> you can find it again!
> 
> Thanks,
> Hank
> K4HYJ
> 
> 
>> On May 17, 2023, at 12:07 AM, Walter Underwood <wun...@wunderwood.org> wrote:
>> The mic bias is +3.3 V on the tip. On the KX3, there is also a logic level 
>> DC voltage on the ring. This is not as clean as the mic bias and can cause 
>> some noise on mics that short those. You can split out those signals with a 
>> TRS plug or a stereo-to-mono splitter. See this blog post (from me) for 
>> details.
>> 
>> https://observer.wunderwood.org/2015/08/16/yamaha-cm500-headset-with-ptt-on-elecraft-kx3/
>> 
>> Phantom power for studio mics is quite different.
>> 
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>> 
>>> On May 16, 2023, at 6:40 PM, Alan Geller via Elecraft 
>>> <elecraft@mailman.qth.net> wrote:
>>> 
>>> Is what Elecraft calls mike “bias” in the K3 and K3s Owners handbooks 
>>> Equivalent to the “48 volt ghost voltage” required for condenser mikes et al
>>> In the broadcast and music industry ?
>>> 
>>> It is mentioned that “mike bias” needs to to be turned on for condenser 
>>> type mikes
>>> But off for dynamic types which is also equivalent for the more common 
>>> Term  “48 volt ghost voltage”
>>> 
>>> Thanks for any help
>>> 
>>> Alan/K6ADG
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wun...@wunderwood.org
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to h...@optilink.us
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to