Hi Julie and Jim
Many thanks for the comments on tripod adapter. The one at the show was a lot simpler (sorry I didn’t take a photo). Rather than explain, I’ve made a very crude version with plasticine to show the concept – images at https://www.dropbox.com/sh/4ic1v5pzqe8dqx8/AAAAwh5Ms0AGEvrmluNFvLmna?dl=0 It simply had the BNC T piece, the ¼ socket, and a 4mm hole for the radial. As I mentioned, I think this was 3D printed (and a lot neater than my plasticine!). 73s David From: Julia Tuttle <[email protected]> Date: Saturday, 24 June 2023 at 18:49 To: <[email protected]> Cc: Elecraft <[email protected]> Subject: Re: [Elecraft] AX1 on tripod Is this perhaps what you saw? https://elecraft.com/products/axt1_axt1-tripod-adapter On Sat, Jun 24, 2023, 13:24 David <[email protected]> wrote: Hi I’ve just been to the Friedrichshaven radio show and the Elecraft stand was demonstrating the AX1 mounted on a tripod. Unfortunately they only sell it as a kit. Does anybody know of a camera tripod screw (1/4-20) to BNC adapter? It looked like a 3d printed plastic connector with a BNC “T” connector and a 4mm hole for a banana plug for a radial. Thanks and 73s David G7IDB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
