Yep that seems to work. Yet when I plug the usb back Up, one of the programs keys the radio transmitter. I turn the radio off and then back On to use one of these programs. Both programs are using the same Com Port.
Jeff Sent from my iPhone > On Jul 3, 2023, at 2:36 PM, [email protected] wrote: > > Send Elecraft mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.qth.net/mailman/listinfo/elecraft > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Elecraft digest..." > > > Today's Topics: > > 1. Elecraft CW Net Announcement (kevin) > 2. Err 70 PTT low power (Jeff Drew) > 3. Re: KXPA100 (Gerry leary) > 4. Re: Err 70 PTT low power (Christian Friess) > 5. Re: K2/10 (Michael Carter) > 6. K2: Filter Aliginment software for Apple MACs. > (Francis Cummings, III) > 7. Re: K4 Rx is awesome... (George Thornton) > 8. Re: Err 70 PTT low power (Jim Brown) > 9. Re: K4 Rx is awesome... (David Gilbert) > 10. "SOLD"......FOR SALE.....K2/10 (KJ) > 11. Elecraft CW Net Report (kevin) > 12. Re: Elecraft CW Net Report (Brian Hunt) > 13. K3 Receive gone (Jim Rhodes) > 14. Re: K3 Receive gone (Michael Carter) > 15. Re: K3 Receive gone (George Fremin III) > 16. Re: K2: Filter Aliginment software for Apple MACs. > (Alan D. Wilcox) > 17. Re: K2: Filter Aliginment software for Apple MACs. > (Walter Underwood) > 18. Re: K2: Filter Aliginment software for Apple MACs. > (John Magliacane) > 19. For Sale K3 DX/Contesting Transceiver an accessories > (David Needham) > 20. Fwd: For Sale K3 DX/Contesting Transceiver and accessories > (David Needham) > 21. July K4/K4D plus KPA1500 and KPA500 Amplifier Specials - More > Details (Eric Swartz) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 1 Jul 2023 20:42:37 -0700 > From: kevin <[email protected]> > To: Elecraft Reflector <[email protected]> > Subject: [Elecraft] Elecraft CW Net Announcement > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Good Evening, > > ?? Sun, with a little rain, has made the forest green.? It smells > great.? More new birds arrived.? The young Gray jays have learned to > fly.? I noticed them falling onto the roof until they gained control.? > Now they have joined the flock flying around. > > ?? The sun has a very large sunspot group.? There was a glancing CME > earlier today.? Solar activity is a little lower at the moment.? Good > propagation with only summer storms to contend could happen.? A > thunderstorm would clear the skies and cool things down.? I'm sure Texas > would enjoy a cool front. > > > Please join us on (or near): > > 14050 kHz at 2200z Sunday (3 PM PDT Sunday) > ?7047 kHz at 0000z Monday (5 PM PDT Sunday) > > ?? 73, > ????? Kevin. KD5ONS > > > > > > > - > > > > > > The Universe is already mad, anything else would be redundant. > > > > > > > ------------------------------ > > Message: 2 > Date: Sun, 2 Jul 2023 03:38:40 -0500 > From: Jeff Drew <[email protected]> > To: [email protected] > Subject: [Elecraft] Err 70 PTT low power > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > The K4 does one of two things: > > * gets stuck in transmit mode. Remedy: turn off radio. > > * Will not transmit when PTT or > Keyed. Remedy: None > > I changed pistol grip PTT which did not corrrect problem. Need to know the > fix for this problem urgently. > > Jeff > N4JDU > > Sent from my iPhone > > > ------------------------------ > > Message: 3 > Date: Sun, 2 Jul 2023 08:14:42 -0600 > From: Gerry leary <[email protected]> > To: Gary Memory <[email protected]> > Cc: Elecraft Reflector <[email protected]> > Subject: Re: [Elecraft] KXPA100 > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > I got one when they first came out. It was so much fun that I think I played > with it for two days straight without stopping for anything except necessary > breaks and sleep. > > Gerry Leary Wb6ivf > > On Jul 1, 2023, at 1:37 PM, Gary Memory <[email protected]> wrote: > > ?Hey Rob??I ordered it in January. I did the internal tuner as well. This > afternoon I?ve been loading it up into a EFHW 62 foot wire, with a KX2 as > the ?exciter?. Thus far it has worked flawlessly! > > Hope yours comes soon! I got the impression there will be several orders > filled now or soon. > > Gary > >> On Sat, Jul 1, 2023 at 15:16 Rob VA7RPE <[email protected]> wrote: >> >> Very nice! >> >> When did you order it? I?m still waiting for mine. >> >> 73s >> >> Rob - VA7RPE >> On Jul 1, 2023, 12:15 PM -0700, Gary Memory <[email protected]>, >> wrote: >> >> I really need to mow our lawn. It is high enough to feed cows. But??.my >> long awaited KXPA100 finally arrived!! The lawn can wait! My XYL?s eyes >> are still rolling! But she brought me a sandwich for lunch, knowing that >> I?m living in another world right now. >> >> Gary, N7BRJ >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > ------------------------------ > > Message: 4 > Date: Sun, 2 Jul 2023 16:54:09 +0200 > From: Christian Friess <[email protected]> > To: [email protected] > Subject: Re: [Elecraft] Err 70 PTT low power > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hi from Bavaria, > > I don't own a K4. But my experience let me bet "RF got into a cable". > I wonder what power you are using. > > Have you hooked the K4 to a computer? If so, it could be a problem with > the port or software. > > Good Luck > > Chris, DL2MDU > >> Am 02.07.2023 um 10:38 schrieb Jeff Drew via Elecraft: >> The K4 does one of two things: >> >> * gets stuck in transmit mode. Remedy: turn off radio. >> >> * Will not transmit when PTT or >> Keyed. Remedy: None >> >> I changed pistol grip PTT which did not corrrect problem. Need to know the >> fix for this problem urgently. >> >> Jeff >> N4JDU >> >> Sent from my iPhone >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] >> > > > ------------------------------ > > Message: 5 > Date: Sun, 2 Jul 2023 16:30:15 +0000 > From: Michael Carter <[email protected]> > To: Elecraft Reflector Reflector <[email protected]> > Subject: Re: [Elecraft] K2/10 > Message-ID: > > <bl3p223mb03857d8245a3bbce31bdf0d9e4...@bl3p223mb0385.namp223.prod.outlook.com> > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Allan, > > In your original post you said your > K2 seemed somewhat 'deaf.' > > Does that mean you hear no signals at > all on any band, no signals on one or > two bands, or just weak audio with > antenna or signal generator input? > > Since your K2 has the K160RX option, > I would check that the RX antenna > is not inadvertently selected in the > menu, especially if there is nothing > connected to that antenna port. > > In your most recent post you indicated > that the sudden deafness occurred > after the transceiver was working fine. > When you wrote that 'the power cut > out and left the K2 in this state' after > starting to recalibrate the ATU, can > you clarify what you mean by that > statement? Is there any TX power > output or just not what the Power > control indicates? > > I would recommend ceasing effort > to realign the radio from scratch > until the cause(s) of the abrupt > loss of some functionality is (are) > identified. The issue with the > VFO realignment is a separate matter > unless the VFO has ceased to oscillate > at all. > > 73, > Mike, K8CN > > > ------------------------------ > > Message: 6 > Date: Sun, 2 Jul 2023 10:53:10 -0700 > From: "Francis Cummings, III" <[email protected]> > To: [email protected] > Subject: [Elecraft] K2: Filter Aliginment software for Apple MACs. > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > Hi All > > What software can you use on a Mac in place of Spectrogram to set up filters? > > Any details on the set up the S/W that would be helpful too! > > Thank you and 73 > > Francis KB7IP > K2 > > > > > ------------------------------ > > Message: 7 > Date: Sun, 2 Jul 2023 18:03:58 +0000 > From: George Thornton <[email protected]> > To: David Fifield <[email protected]>, "[email protected]" > <[email protected]> > Subject: Re: [Elecraft] K4 Rx is awesome... > Message-ID: > > <dm8pr16mb434387ddd8abdfc1765dbd21b4...@dm8pr16mb4343.namprd16.prod.outlook.com> > > Content-Type: text/plain; charset="utf-8" > > That was not my experience. > > Right out the bat we were occupying a frequency and calling. We were heard > so well we found ourselves at the bottom of a pileup for the next two or more > hours. > > You might want to take a closer look at your various mic and transmitter > settings. These have to be adjusted correctly for maximum effect. > > > > -----Original Message----- > From: [email protected] <[email protected]> On > Behalf Of David Fifield > Sent: Saturday, June 24, 2023 6:29 PM > To: [email protected] > Subject: [Elecraft] K4 Rx is awesome... > > I?ve been using my K4 at 100W (per the FD rules) this afternoon on several > bands. > I am 1D OR. > I can hear many many stations but hardly any of them can hear me. > To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and > just, well, awesome. > If the other stations had better receivers, they might be able to hear me > calling them. > They are obviously bogged down with on-site overload/spurii/phase noise etc. > What a pity. > I gave up replying hopelessly to CQFD?s from other 100W stations and went and > did some woodworking instead. > Much more satisfying. Oh well?. > > 73, Dave AD6A > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [email protected] > > ------------------------------ > > Message: 8 > Date: Sun, 2 Jul 2023 11:27:13 -0700 > From: Jim Brown <[email protected]> > To: [email protected] > Subject: Re: [Elecraft] Err 70 PTT low power > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > >> On 7/2/2023 7:54 AM, Christian Friess wrote: >> I don't own a K4. But my experience let me bet "RF got into a cable". >> I wonder what power you are using. > > There is a SCREAMING Pin One Problem at the connector for the paddle > and/or the key. From what I can discern from Elecraft's response, it is > the result of the availability of the connectors, and circuitry to > detect the presence of a connector being inserted. It may also be > present at other rear panel connectors. I experienced it here the first > time I fired up on 10M, with the TX antenna on a 120 ft tower 100 ft > from the shack. I wound ferrite chokes onto those cables and to others > at the rear panel. > > 73, Jim K9YC > > > > > > > ------------------------------ > > Message: 9 > Date: Sun, 2 Jul 2023 11:32:41 -0700 > From: David Gilbert <[email protected]> > To: [email protected] > Subject: Re: [Elecraft] K4 Rx is awesome... > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > > > He never said what kind of antenna he was using. ? A lossy antenna is > much worse on transmit than it is on receive.? You can easily tolerate > 20 dB or more loss on receive (for pretty much ANY rig) ... but not on > transmit, especially in a contest like FD where there is tons of QRM on > the other end. > > The K4 is a very fine rig, but not because of anything he claimed. > > 73, > Dave?? AB7E > > > >> On 7/2/2023 11:03 AM, George Thornton wrote: >> That was not my experience. >> >> Right out the bat we were occupying a frequency and calling. We were heard >> so well we found ourselves at the bottom of a pileup for the next two or >> more hours. >> >> You might want to take a closer look at your various mic and transmitter >> settings. These have to be adjusted correctly for maximum effect. >> >> >> >> -----Original Message----- >> From: [email protected] <[email protected]> On >> Behalf Of David Fifield >> Sent: Saturday, June 24, 2023 6:29 PM >> To: [email protected] >> Subject: [Elecraft] K4 Rx is awesome... >> >> I?ve been using my K4 at 100W (per the FD rules) this afternoon on several >> bands. >> I am 1D OR. >> I can hear many many stations but hardly any of them can hear me. >> To me, this means that the K4 Rx is bomb-proof, sensitive, selective, and >> just, well, awesome. >> If the other stations had better receivers, they might be able to hear me >> calling them. >> They are obviously bogged down with on-site overload/spurii/phase noise etc. >> What a pity. >> I gave up replying hopelessly to CQFD?s from other 100W stations and went >> and did some woodworking instead. >> Much more satisfying. Oh well?. >> >> 73, Dave AD6A >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html Message >> delivered to [email protected] >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > > ------------------------------ > > Message: 10 > Date: Sun, 2 Jul 2023 16:51:27 -0400 > From: KJ <[email protected]> > To: [email protected] > Subject: [Elecraft] "SOLD"......FOR SALE.....K2/10 > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > Thanks to Christian for the sale > Ken, W2GIW > > > ------------------------------ > > Message: 11 > Date: Sun, 2 Jul 2023 17:25:26 -0700 > From: kevin <[email protected]> > To: Elecraft Reflector <[email protected]> > Subject: [Elecraft] Elecraft CW Net Report > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Good Evening, > > ?? Twenty meters was fairly quiet but minimally productive. There was > little thunder storm noise on either band.? That should give me a hint.? > On forty meters Dwight, WM5F mentioned a solar storm.? When I signed off > I came in here to check.? Sure enough that roaring sound drove his > normally S9 signal close to the noise.? We are also experiencing D layer > absorption.? Good test of propagation :)? https://solarham.net/ gave me > a map. > > ?? Birding difficulties between nets: first a male Golden Crowned > Kinglet, then an immature female Wilson's Warbler, followed by an > immature Yellow Warbler.? Next an immature Golden Crowned Kinglet.? > Argh!!? I am being tested. > > > ? On 14050.5 kHz at 2200z: > > K0DTJ - Brian - CA > > K6XK - Roy - IA > > > ? On 7047.5 kHz at 0000z: > > WM5F - Dwight - ID > > > Until next week 73, > > ?? Kevin.? KD5ONS > > > > > > - > > > > > How to raise e to a matrix power: > https://www.youtube.com/watch?v=O85OWBJ2ayo > > https://www.3blue1brown.com/ > > https://www.quantamagazine.org/flow-proof-helps-mathematicians-find-stability-in-chaos-20230615/ > > Write an Eulerian fluid simulator: > https://www.youtube.com/watch?v=iKAVRgIrUOU > > > > > ------------------------------ > > Message: 12 > Date: Sun, 2 Jul 2023 19:03:44 -0700 > From: Brian Hunt <[email protected]> > To: Elecraft Reflector <[email protected]> > Subject: Re: [Elecraft] Elecraft CW Net Report > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > Kevin, > You were good on 20 meters with some deep QSB but OK copy. Then we got > whacked by the sun pretty hard between nets and the story changed on 40 > meters. I could hear you at first but your signal was below the noise peaks > so your CW was getting chopped up and nearly uncopyable. > > Hoping for better next week! > > 73, > Brian, K0DTJ > >> On Jul 2, 2023, at 17:26, kevin <[email protected]> wrote: >> >> ?Good Evening, >> >> Twenty meters was fairly quiet but minimally productive. There was little >> thunder storm noise on either band. That should give me a hint. On forty >> meters Dwight, WM5F mentioned a solar storm. When I signed off I came in >> here to check. Sure enough that roaring sound drove his normally S9 signal >> close to the noise. We are also experiencing D layer absorption. Good test >> of propagation :) https://solarham.net/ gave me a map. >> >> Birding difficulties between nets: first a male Golden Crowned Kinglet, >> then an immature female Wilson's Warbler, followed by an immature Yellow >> Warbler. Next an immature Golden Crowned Kinglet. Argh!! I am being >> tested. >> >> >> On 14050.5 kHz at 2200z: >> >> K0DTJ - Brian - CA >> >> K6XK - Roy - IA >> >> >> On 7047.5 kHz at 0000z: >> >> WM5F - Dwight - ID >> >> >> Until next week 73, >> >> Kevin. KD5ONS >> >> >> >> >> >> - >> >> >> >> >> How to raise e to a matrix power: https://www.youtube.com/watch?v=O85OWBJ2ayo >> >> https://www.3blue1brown.com/ >> >> https://www.quantamagazine.org/flow-proof-helps-mathematicians-find-stability-in-chaos-20230615/ >> >> Write an Eulerian fluid simulator: >> https://www.youtube.com/watch?v=iKAVRgIrUOU >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > > ------------------------------ > > Message: 13 > Date: Sun, 2 Jul 2023 23:02:06 -0500 > From: Jim Rhodes <[email protected]> > To: [email protected] > Subject: [Elecraft] K3 Receive gone > Message-ID: > <CALhxr4Y_ZLz+0Cws2pgyaaukpTDZrrBf3jywhXA4B0B=pd0...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > A few months ago K4 #1200 came to live in my shack and K3 #4083 got a > vacation on the shelf. It was working fine up until then, in regular use. > When I pulled it down in preparation for Field Day it no longer had any > receive on any band. Full output on every band except 10 meters where it > only did 70 watts. Plugging my XG2 into any port on the ATU even on the 50 > uV setting shows no S meter deflection and no tone in receiver (a small > amount of quieting on 20). Can anyone give me any hints to try before I > contact the mothership? > > -- > Jim K0XU > [email protected] > > > ------------------------------ > > Message: 14 > Date: Mon, 3 Jul 2023 10:34:18 +0000 > From: Michael Carter <[email protected]> > To: Elecraft Reflector Reflector <[email protected]> > Subject: Re: [Elecraft] K3 Receive gone > Message-ID: > > <bl3p223mb0385de943054831dbacdfaa7e4...@bl3p223mb0385.namp223.prod.outlook.com> > > Content-Type: text/plain; charset="iso-8859-1" > > Hi Jim, > > Does your K3 have the KXV3 interface > or KRX3 subreceiver options installed? > If so, I would check the menu settings > to be sure that the rig doesn't have > the RX antenna port selected as its > antenna source and that the subreceiver > isn't the primary receiver. > > If it's not a menu setting issue, I would > remove the ATU and re-install the original > KANT3 antenna board, then test again with > actual antenna or your signal generator. > > You mentioned that the K3 sat on a shelf > for several months - was it connected to > anything or were all cables disconnected? > > Was it stored in an environment where > corrosion on internal connectors/circuit > board headers might have occurred during > its 'vacation' from active use? > > 73, > Mike, K8CN > > > > ------------------------------ > > Message: 15 > Date: Mon, 3 Jul 2023 08:44:45 -0500 > From: George Fremin III <[email protected]> > To: Michael Carter <[email protected]> > Cc: Elecraft Reflector Reflector <[email protected]> > Subject: Re: [Elecraft] K3 Receive gone > Message-ID: <[email protected]> > Content-Type: text/plain; charset=utf-8 > > I had a k3 go deaf - and it was not any of the RX antenna switching or other > issues. In my case it sounded dead but with a really strong signal I could > hear something. I think it took the highest setting on the XG3 to get > signal. > > I think I posted an update to that in this channel. > > It was a pin diode on the bottom of the radio and I got some from Mouser and > replaced it and it has been working fine since. > > If you can not find the post in the archives - let me know and I can try to > dig up the info. > > George Fremin III > >> On Jul 3, 2023, at 5:36 AM, Michael Carter <[email protected]> wrote: >> >> ?Hi Jim, >> >> Does your K3 have the KXV3 interface >> or KRX3 subreceiver options installed? >> If so, I would check the menu settings >> to be sure that the rig doesn't have >> the RX antenna port selected as its >> antenna source and that the subreceiver >> isn't the primary receiver. >> >> If it's not a menu setting issue, I would >> remove the ATU and re-install the original >> KANT3 antenna board, then test again with >> actual antenna or your signal generator. >> >> You mentioned that the K3 sat on a shelf >> for several months - was it connected to >> anything or were all cables disconnected? >> >> Was it stored in an environment where >> corrosion on internal connectors/circuit >> board headers might have occurred during >> its 'vacation' from active use? >> >> 73, >> Mike, K8CN >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > > ------------------------------ > > Message: 16 > Date: Mon, 3 Jul 2023 13:41:28 -0400 > From: "Alan D. Wilcox" <[email protected]> > To: [email protected], "Francis Cummings, III" <[email protected]> > Subject: Re: [Elecraft] K2: Filter Aliginment software for Apple MACs. > Message-ID: > <[email protected]> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Francis, > > FWIW, I was hunting for a Mac subst for Spectrogram recently, and really > didn't find much at all. > "iSpectrum" is all I could find free - or even at a modest price - and > it didn't come close to Spectrogram. It could hardly display the > passband of the K2, much less allow for any alignment using it. > > I use a Win7 desktop in the shop, and Spectrogram does excellently for > K2 alignments. > > Short of a specific Mac application, one might run a Windows virtual > machine (VirtualBox, Parallels, etc) as a host for Spectrogram. The > catch is, at least for the newer Apple silicon (M1, M2), is that you'd > need a copy of Windows that can run on non-Intel codebase. I've not > researched that alternative much however. For the number of times > Spectrogram might be needed, it's easier/cheaper to just use an old Win PC. > > If you do find something that works on your Mac, let us all know! > > Thanks for writing. > > Alan > > Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955) > 570-916-9590 (cell, text) > https://WilcoxEngineering.com > http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments > http://amazon.com/author/alandwilcox > Williamsport, PA 17701 > >> On 7/2/23 13:53, Francis Cummings, III via Elecraft wrote: >> Hi All >> >> What software can you use on a Mac in place of Spectrogram to set up filters? >> Any details on the set up the S/W that would be helpful too! >> >> Thank you and 73 >> >> Francis KB7IP >> K2 >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > ------------------------------ > > Message: 17 > Date: Mon, 3 Jul 2023 10:55:42 -0700 > From: Walter Underwood <[email protected]> > To: elecraft <[email protected]> > Subject: Re: [Elecraft] K2: Filter Aliginment software for Apple MACs. > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > These days, it is probably easier to just get a TinySA device for $70. > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > >> On Jul 3, 2023, at 10:41 AM, Alan D. Wilcox <[email protected]> >> wrote: >> >> Francis, >> >> FWIW, I was hunting for a Mac subst for Spectrogram recently, and really >> didn't find much at all. >> "iSpectrum" is all I could find free - or even at a modest price - and it >> didn't come close to Spectrogram. It could hardly display the passband of >> the K2, much less allow for any alignment using it. >> >> I use a Win7 desktop in the shop, and Spectrogram does excellently for K2 >> alignments. >> >> Short of a specific Mac application, one might run a Windows virtual machine >> (VirtualBox, Parallels, etc) as a host for Spectrogram. The catch is, at >> least for the newer Apple silicon (M1, M2), is that you'd need a copy of >> Windows that can run on non-Intel codebase. I've not researched that >> alternative much however. For the number of times Spectrogram might be >> needed, it's easier/cheaper to just use an old Win PC. >> >> If you do find something that works on your Mac, let us all know! >> >> Thanks for writing. >> >> Alan >> >> Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955) >> 570-916-9590 (cell, text) >> https://WilcoxEngineering.com >> http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments >> http://amazon.com/author/alandwilcox >> Williamsport, PA 17701 >> >>> On 7/2/23 13:53, Francis Cummings, III via Elecraft wrote: >>> Hi All >>> >>> What software can you use on a Mac in place of Spectrogram to set up >>> filters? >>> Any details on the set up the S/W that would be helpful too! >>> >>> Thank you and 73 >>> >>> Francis KB7IP >>> K2 >>> >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to [email protected] >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [email protected] > > > > ------------------------------ > > Message: 18 > Date: Mon, 3 Jul 2023 18:37:47 +0000 (UTC) > From: John Magliacane <[email protected]> > To: [email protected], "Francis Cummings, III" <[email protected]> > Subject: Re: [Elecraft] K2: Filter Aliginment software for Apple > MACs. > Message-ID: <[email protected]> > Content-Type: text/plain; charset=UTF-8 > > Francis, > > I use Baudline under Linux for various audio spectrum analysis tasks. There's > a Mac version as well: > > https://baudline.com/what_is_baudline.html > > https://baudline.com/download.html > > > 73 de John, KD2BD > > > ------------------------------ > > Message: 19 > Date: Mon, 3 Jul 2023 14:55:23 -0400 > From: David Needham <[email protected]> > To: [email protected] > Subject: [Elecraft] For Sale K3 DX/Contesting Transceiver an > accessories > Message-ID: > <calnjpz1w9aagqbtu6qtkhv4jk3qgsvswqydfdecf8ofjy+s...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > I am selling my well equipped, single receiver K3. It comes from a > non-smoking, no pet home and is in excellent condition. It has been my > backup rig and is lightly used. It will come carefully packed in an > Elecraft K3 box. > > It is Serial number 52XX and includes the following: > - KSYN3A-F, Synthesizer upgrade > - KDVR3, Digital Voice Recorder > - K312VMDKT-F, 12VDC mod for P-3 power > - KXV3B-F, RX Ant, IF out, Preamp > - KIO3B USB Interface upgrade > - 2.7 kHz stock SSB filter > - 2.1 hHz, 8 pole SSB filter > - 400 Hz, 8 pole CW filter > - 250 Hz, 8 pole CW filter > - Neogrip for tuning knob > > I sent it to the factory for the following updates in October 2017: > - KPOD Ready, FP R82 to 6.8 ohm > - L3AudProtMDKT Audio Protection Board > - Gold Pins: Front Panel, P30 and P35 > - 7T Capacitor > - Stainless top cover screws > - Factory calibration and alignment to meet or exceed factory specifications > > Price $1,950, which includes 50% of the cost for shipping and insurance to > the lower US 48 states. Other locations are negotiable. > > Also for sale: > - KAT3A 100W ATU, new, never installed $425.00 > - K-Pod and flat cable for K3, like new, includes new KPOD Aux cable $295 > > Please contact me off list at AA4VT dot Dave at gmail dot com > -- > Thank you! > David Needham, AA4VT > > > ------------------------------ > > Message: 20 > Date: Mon, 3 Jul 2023 14:58:25 -0400 > From: David Needham <[email protected]> > To: [email protected] > Subject: [Elecraft] Fwd: For Sale K3 DX/Contesting Transceiver and > accessories > Message-ID: > <CALNJPz29N=ZY5p8ytLdxhgZu3Zp4y91pkyu=j9f+f_vxvfn...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > (Subject typo corrected) > > I am selling my well equipped, single receiver K3. It comes from a > non-smoking, no pet home and is in excellent condition. It has been my > backup rig and is lightly used. It will come carefully packed in an > Elecraft K3 box. > > It is Serial number 52XX and includes the following: > - KSYN3A-F, Synthesizer upgrade > - KDVR3, Digital Voice Recorder > - K312VMDKT-F, 12VDC mod for P-3 power > - KXV3B-F, RX Ant, IF out, Preamp > - KIO3B USB Interface upgrade > - 2.7 kHz stock SSB filter > - 2.1 hHz, 8 pole SSB filter > - 400 Hz, 8 pole CW filter > - 250 Hz, 8 pole CW filter > - Neogrip for tuning knob > > I sent it to the factory for the following updates in October 2017: > - KPOD Ready, FP R82 to 6.8 ohm > - L3AudProtMDKT Audio Protection Board > - Gold Pins: Front Panel, P30 and P35 > - 7T Capacitor > - Stainless top cover screws > - Factory calibration and alignment to meet or exceed factory specifications > > Price $1,950, which includes 50% of the cost for shipping and insurance to > the lower US 48 states. Other locations are negotiable. > > Also for sale: > - KAT3A 100W ATU, new, never installed $425.00 > - K-Pod and flat cable for K3, like new, includes new KPOD Aux cable $295 > > Please contact me off list at AA4VT dot Dave at gmail dot com > -- > Thank you! > David Needham, AA4VT > > > -- > Thank you! > David Needham, AA4VT > > > ------------------------------ > > Message: 21 > Date: Mon, 3 Jul 2023 12:26:08 -0700 > From: Eric Swartz <[email protected]> > To: Elecraft list <[email protected]> > Subject: [Elecraft] July K4/K4D plus KPA1500 and KPA500 Amplifier > Specials - More Details > Message-ID: > <cage0ydapjlpnouzjbkvfnh4ynjb4ksm0rcdtopo53tgknwk...@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Here are more specifics on the July Specials Madelyn mentioned below in > her earlier email to the Elecraft list: > > K4-F K4 Transceiver, Factory Assembled, $200 Discount & Free Shipping > > K4D-F K4D Transceiver, Factory Assembled, $200 Discount & Free Shipping > > K4TOK4DUPG K4 Upgrade Kit to K4D, $50 Discount & Free Shipping > > KPA1500-F 1500+ W Solid State Amplifier, $150 Discount & Free Shipping > > KPA500-F KPA500 500w Amplifier, Assembled, $100 Discount & Free Shipping > > KAT500-F KAT500-F High Power ATU, $40 Discount & Free Shipping > > PWRCOMBO-F KPA500 & KAT500 Power Combo, Assembled, $75 Combo Savings + $140 > Discount & Free Shipping > > Plus additional free shipping specials on more items. > > All of these products are in daily production and are shipping from stock > to 3-9 working days, depending on our weekly order quantities. > > See full details on the specials order page at: > https://elecraft.com/products/july-specials > > 73, > Eric > *elecraft.com <http://elecraft.com/>* > --- > On Fri, Jun 30, 2023 at 5:04?PM Madelyn Gomez <[email protected]> wrote: > > Check out the July Specials for some dang good deals! >> They are already posted and we have units on the shelf to ship. >> >> The specials include K4, K4D, K4toK4D upgrade, and select amps. >> >> Madelyn Gomez >> Elecraft Sales > > > ------------------------------ > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > http://mailman.qth.net/mailman/listinfo/elecraft > You must be a subscriber to post. > Elecraft web page: http://www.elecraft.com > > End of Elecraft Digest, Vol 231, Issue 2 > **************************************** ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
