Thank you all for the quick reply and suggestions. Good work as all is well.
The CONFIG.PTT was set to other than OFF-OFF, made the change in settings ERR-PTT no longer an issue. Following up on the Notes Guide and will make those changed also as I was getting the “Unable to creat shared memories ….” On a MAC M1. Again thank you all for your kind replies. R Gilley AD1G > On Jul 27, 2023, at 8:10 AM, Richard Ferch <[email protected]> wrote: > > ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something > (or DTR-something), and something in the computer is activating RTS (or > DTR) at the time the radio is powered up. > > If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY > to OFF-OFF (or OFF-DTR if you want to use DTR for CW keying), and in your > radio control software (WSJT-X and any other programs you use for radio > control) use CAT for PTT control. > > 73, > Rich VE3KI > > AD1G wrote: >> ... I have receive and Tx ok but I also have ERR PTT displayed. ... > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
