Glenn; You will want the two Aux cables to connect the K3S to the KAT500, then the KAT500 to the KPA500. The cables are described in the equipment manuals. When the KAT500 is in a tune or finds some error situation, it will negate the key line to the KPA500 until the KAT is able to correct the situation.
With this setup, you don’t need the key line interrupter that the W2 provides since the KAT500 is doing it for you. If you need any help, just ask. We hope you really enjoy your KPA500/KAT500 combination! 73, Jack, W6FB > On Oct 10, 2023, at 7:17 AM, Glenn Maclean <wa7...@att.net> wrote: > > I just ordered the KPA500/KAT500 combo and W2 watt meter for my K3S. Should I > use the key line interrupt connected to the W2 watt meter or should I connect > the key line interrupt to the KAT500? Do I even need to use key line > interrupt with the K line set up? > Thanks in advance > Glenn WA7SPY > > Sent from my iPhone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jackbrin...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
