Jim,
It is doubtful that will work if the K3 has been set to factory defaults
by EEINIT.
73,
Don W3FPR
On 10/17/2023 11:59 AM, Jim McCook wrote:
Dave,
Open the K3 Utility and click on Calibration. Scroll down to
Configure Crystal Filters. The top line shows the various bandwidths
of the installed filters. You can see the big picture there with the
checked boxes.
Jim W6YA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
