Or alternatively, have selected AUX.
Turn on Sub RX, Hold A/B (B Set) and note the antenna shown
in the VFO B area. With B Set engaged, tapping ANT will toggle
Main/Aux.
Note this setting is saved per band.
73,
... Joe, W4TV
On 2026-03-06 12:18 PM, Mike Harris via Elecraft wrote:
Oops,
Finger trouble. That should read ANT1 or ANT2.
Regards,
Mike VP8NO
-------- Forwarded Message --------
Subject: Re: [Elecraft-K3] Sub Rx deaf but only on 24MHz
Resent-Date: Fri, 06 Mar 2026 09:04:58 -0800
Resent-From: [email protected]
Date: Fri, 6 Mar 2026 14:04:43 -0300
From: Michael Harris via groups.io <[email protected]>
Reply-To: [email protected]
To: [email protected]
Stewart, If you have the internal ATU check that you have the right
antenna selected. You might be listening to an open port.
ANT selected ANT1 or ANMT2 showing on the display. This selection is
memorised per band.
Regards,
Mike VP8NO
On 06/03/2026 13:37, Stewart G4AFF via groups.io wrote:
I have noticed, as I've tried to work 3Y0K on 24MHz, that if I select
Subin order to hear the sub-receiver in my right ear I hear no
signals. I do hear noise at about the same level as the main rx. This
only occurs on 24MHz, no other bands.
Does anyone know where I should start looking to resolve this annoying
issue?
Thanks,
Stewart G4AFF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
