Hi all, I have decided to put my K2 and associated equipment in one large case for easier deployment in emergencies. My friend Bill Albert AD5TD has done this with an FT100 in an old camp stove enclosure. There is a rather poor photo of it at: http://www.kristv.com/Global/story.asp?s=5074978
My question is whether I need to space the equipment apart to prevent EMI. I know you need to use the K2VCOSHLDKT mod kit if you want to place the K2 near an amp. I will probably stack the equipment with the K2 on the bottom, The KPA100/KAT100 in the EC2 case above it, a Yaesu FT8100R on top of that, and either an SEC1223, or Astron ss30 switching power supply on top of that. I will be spacing the equipment for some ventilation and the rear side of the case will be removable for additional ventilation during actual operations. Right now I use a muffin fan on top of the KPA100 and will probably permanently mount that on the amp. If anyone can offer any advice it is appreciated. I will probably build the box out of Luan plywood and fiberglass cloth. Having everything assembled in the box will help keep things together during a deployment and also make it easier to operate mobile without leaving something at home. Regards, Steve, W2MY/5 Corpus Christi, TX USA -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.12.0/439 - Release Date: 9/6/2006 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
