Marcin, There is nothing in the KPA100 or the base K2 that would cause that problem on 17 meters only. In the base K2, the relay switching is shared for 17 and 15 meters except for relay K6 in the bandpass filter, and in the KPA100, all circuits are shared between 17 and 20 meters. You would have a problem on either 20 meters or 15 meters in addition to 17 meters if it was associated with either the K2 or KPA100 switching relays.
If you have a dedicated 17 meter antenna, you may want to investigate the switching to that antenna. TUNE should behave the same as transmit, but you say that receive sensitivity does not drop after TUNE - that is indeed strange. We need more data. 73, Don W3FPR > -----Original Message----- > Hi all, > > In last Friday I have been finished KAT100/KPA100 in EC2. > Few days ago one problem occurred - before TX on 17m RX is OK, after TX on > this band RX dropping down. This is only on HI power range, on LOW > power range everything is OK. > When I change band to other then 17m and then come back to 17m RX stay > OK to the TX and then drop down again. When I Off then On K2 or push > TUNE key, RX come back to normal. > Is anyone know what is the problem? > > 73, > Marcin SQ2AF > > K2 #5408 > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
