On Tue, Jun 23, 2026 at 5:17 AM Irwin via Elecraft <[email protected]> wrote:
> Has anyone been able to set up a remote control of a KPA500. > Yes, the KPA500 Remote software has been in used for this for many years (as well as the KAT500 Remote software). Download here: https://elecraft.com/pages/kpa1500-kpa500-kat500-remote-software This requires a PC in the shack to be running at all times, connected by USB-to-Serial adapter to the KPA500 and KAT500. If you're trying to avoid doing that, you can use a pair of MOXA boxes to create a remote serial port. https://www.amazon.com/s?k=moxa+ethernet+to+serial I am in the process of setting up my K4D, KPA500 and KAT500 station for > remote control with my K4/0. Although, using a Y-Box, I able to turn the > KPA500 on/off remotely, it always turns on in standby mode. If you want it to power up in OPERATE mode, change KPA500 *MENU:PWR ON* from *STBY* to *OPER*. One solution suggested was a Hamation CR-5. Their support tells me you can > not access it > over the internet. > You don't need to access the CR-5 over the Internet. You don't need the CR-5 unless you want to connect both the KPA500 Utility and the KPA500 Remote software at the same time to the same amplifier. The Elecraft KPA500 remote control software indicates it can be controlled > remotely? > Yes, you run KPA500 Remote in "Host" mode on your shack PC, and the same KPA500 Remote remote software in "Client" mode ("Connect") on the remote PC. This requires port forwarding in your Router to forward to the shack PC's IP address. Has anyone been able to accomplish this? > Yes. If you can't figure it out, contact me off list with your phone number and I will help you configure it all. 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
