John, Not an odd question at all:
Certainly it is possible (and desirable) to center the CW filters at your chosen sidetone pitch. Adjust the BFO frequencies to do just that. Spectrogram is the tool of choice for most folks to adjust the passband positioning. If you have not used it before, I refer you to the info on my website http://w3fpr.qrpradio.com in the K2 dial calibration article, and also to the information that Tom Hammond has on his website www.n0ss.net . Yes it is a straightforward procedure - do not be intimidated by the number of words used to tell folks how to do it - just follow the steps one time through and you will be a pro. 73, Don W3FPR > -----Original Message----- > > I have an odd question for the group. > > As hams age, we begin to notice that our hearing decreases in > sensitivity in the higher registers. > In a K2, one can easily change the Spot audio frequency downward to > accommodate this process. > > Is it straightforward to adjust the filters so their center > frequencies are lower, too? > > Or am I way off the charts on this one? > > John > AB8O > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
