I have been working with the KIO2 for a while to try to get it to work.
It's never really worked since I put it in.
Today I verified with another PC that the K2 does indeed send data
through the KIO2 but it does not receive. I ran the test as described
on page 14 of the KIO2 manual. Steps 1,2,3,4 works fine I get the
FA0xxxxxxxx; to come up in hyperterminal when I hit the DISPLAY button
as instructed. When I try step 5, which is to type SW01; then nothing
happens. The software I tried cannot connect to the K2 either.
The settings on my serial port (COM1) in Device manager (windows 2003
production) are as follows:
Bits Per Second: 4800
Data Bits: 8
Parity: None
Stop Bits: 2
Flow Control: None
I am still baffled by what would cause one way communication, but not
two way communication between the K2 and the PC.
73,
James KB2FCV
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and
security tools, free access to millions of high-quality videos from
across the web, free AOL Mail and more.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
