Joe, The 'KX1 power mod' is available from Elecraft as PN E850230. I could not find it on the website, and I really don't know why.
The change is quite easy - just 2 resistors to change. R30 increases to 33 ohms (from 22) and R11 is decreased to 4.7 ohms (from 10). If you have the 1/4 watt resistors, you can make the change. Someone who had excess offered them on the reflector a day or two ago. The change is needed for the KXB3080 installation, and has been shipped with that option, but it can be installed on any KX1, even though it is not required. Do not exceed 4 watts for any significant length of time with your KX1, and keep a watch on the temperature above the tuning knob if you are operating at higher power levels. 73, Don W3FPR > -----Original Message----- > > I've recently seen reference to a KX1 power mod....where can I > find this mod > and what version of the KX1 is it used on?? > > I checked the Elecraft site but didn't find it...did I miss > something on the > site?? > > 73, Joe W2KJ > K1, KX1, K2, I QRP, therefore I am > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
