Clark, If you have any display at all, even INFO 201 then the Fromt Panel may be OK. That means the problem is likely on the Control Board or at the connectors to the RF Board - and the most likely source of the problem is a bad solder connection. Soldering problems are the most common form of failures. Check the soldering, then re-check the soldering, and when you have finished that, check the soldering!
73, Don W3FPR > -----Original Message----- > > Thanks to you guys who've replied. I forgot to mention that the backlight > works. I tried resetting the radio (i.e. holding down 4,5, & 6 > while turing > the K2 on) and the display shows "Info 201". So, something inthere works. > But still get nothing other than that. > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
