Chris -
Do not be misled by the fact that on CW the K2 transmits on the
frequency as displayed, whereas many of the oriental black boxes
transmit a fixed number of Hz (maybe 600Hz) different to the displayed
frequency to give the required offset.
I have encountered a similar problem with working black boxes on 144MHz
with my K2/KXV144 combination.
I find that the best way is to call on the K2 and then tune the black
box for a suitable beat note. You'll find that the two displays will
differ by about 600Hz.
73 de David G4DMP/G3KEP
In message <[EMAIL PROTECTED]>, G3SJJ <[EMAIL PROTECTED]>
writes
OK, I think I have sussed the problem. Now I need the solution, which I
suspect is re-alignment.
- K2 tuned to 3500, FT1000MP tuned to 3500.
- Transmit on K2 and hear signal on FT1kMP, within 40Hz.
- Transmit on MP
- Nothing heard on K2
- Tune around and signal audible on 3498.90 --- 1100Hz low
Suspect I have the BFO on the wrong side. Back to the drawing board!
Chris G3SJJ
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
