Bernie,
On My K2 (#5779) if I change frequency on the same band and wait for 10
seconds the K2 puts that new frequency in memory so when the rig is powered
off , then back on it returns to the frequency it was last on. If you
change the frequency within the same band and quickly power the rig off, it
will return to the original frequency before the change was made.
Example:
If the rig was at 3760 KHZ and I changed the frequency to 3770 KHZ and
waited 10 seconds before shutting the rig down it will return to 3770 KHZ
when powered up.
If you quickly powered off the rig after the Frequency change the rig will
be at 3760 KHZ when powered up.
Hope that clears up your question.
73
Dave KD1NA
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
