Initial test voltages on pg 23 of KPA100 manual test points are off,
where to start troubleshooting? U1 pin15 = 5.53v should be 0,
pin20=0v should be 5v, pin27=0v should be 5.8v, pin28=0v should be
5.7v, Also U4 pin11 = 0v should be 5v, U6 pin6=4.96v should be 0-.5v.
All other pins test within appropriate ranges. Any help is
appreciated.
Ed
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
