Sadly, I must agree with Jim Brown, K9YC.
By the way Jim, it was a pleasure working you the other day. With a
two letter call and a big signal like your's I mistakenly had you
pegged as another "DX-Snob." Randy, you might keep an ear open for
Jim, he's a very nice guy with an excellent station.
Randy, I am on 160 quite regularly and it is fairly rare to find a
QSO. The only way the rest of us are going to ever get any use out
of the band is to use it and generate some CQ's. Otherwise the
DX'ers will continue having their way. The other morning I was lucky
enough to hook up with K8MP, Delaware OH and KD8BZY, Poda? WA. My
friend Joe had a good signal & was solid copy, whereas I never did
figure out Randy's QTH for sure. Anyway, both good ragchew stations
and close enough to you that either one should be easy copy. Another
good guy on 160 fairly often is K6XK, Rolfe IA. There are others,
but you have to be persistant. It helps if you have a good antenna,
in fact as Jim said, a good antenna is vital to success.
Living on a city lot 90' X 60' with all the noise attendant, I've had
the most success with a Ground Plane on my roof using a Butternut
HF-2V with the 160 meter add-on module. I have the top hat and three
radials that go to the edge of the roof, then "wrap-around" the yard,
either on the back yard fence or in the front yard just running along
the eves. While it certainly is not in a league with what Jim, W9YC,
has, I have NO trouble working the East Coast, Hawaii, and Alaska
during contests such as the one we had two weeks ago. I am running
power though, 300W on a pair of 811A's. Don't expect too much on 5
watts unless your antenna is very much better than mine. As Jim
says, the noise will eat your signal. Another nice thing about a
vertically polarized signal is the ground wave. You'll find working
100 miles in the daytime at high noon is no trick at all, and you can
do that QRP. The secret of course is the very low noise on 160 when
there is no skip. Some years ago I use to have a regular sked with
W6TYP in San Jose 100+ miles from Santa Rosa on AM. I was running a
6L6 crystal oscillator plate modulated. You know, if you modulate
very deeply on negative peaks, the oscillator will start to become
unstable, so about the best you can do is 50% modulation. That's
real QRP! 12 Watts carrier, 6 Watts peak double side-band, 3 Watts
peak each single side-band X 50% modulation! Hi Hi Of course
finding anyone to work within 100 miles on daytime ground-wave is a
nearly insurmountable challenge.
Anyway Randy, good luck & stick with it.
Very 73,
TR, WB6TMY
_____________
Message: 33
Date: Sat, 10 Feb 2007 19:57:44 -0800
From: "Jim Brown" <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] 160m activity?
On Sat, 10 Feb 2007 20:48:48 -0600, Randy Moore wrote:
>I only hear people working DX. All the CQs are
>"CQ DX" and so far no one has answered my CQs.
Sadly, that's very much the nature of 160. Some call it "the
gentlemen's band." I think a better name for it is "the DX snobs
band."
73,
Jim Brown K9YC
Santa Cruz, CA
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
