I have got a fully loaded K2 for sale: Basic K2 KSB2 (SSB Option)
K160RX (160m option) KIO2 (RS-232 Interface) KNB2 (Noise Blanker) KDSP2 (Advanced Internal DSP Filter) KAT2 (20W Internal Automatic Antenna Tuner) FDIMP (Finger Dimple) Yaesu MH-31 microphone Plus all documentation. It was built by an experienced HAM who has also built a KX1 and K1. He works mainly CW, I work SSB. So, I know it is FB on CW. I had it tested at the Telecommunications Authority laboratories to be able to register it. According to their mesaurements the rig seems to be slightly misaligned (I hope this is the correct term). The maximum output powers they have measured are: 2.10 W at 1.8 MHz -- W at 3.5 MHz (they somehow could not measure. I do not know why.) 8W at 7 MHz 11 W at 10 MHz 13.8 W at 14 MHz -- W at 18 MHz (they somehow could not measure. I do not know why.) 9.6 W at 21 MHz 7.5W at 24 MHz 6.06 W at 28 MHz I have made about 1000 SSB QSOs with it, including Japan and Brazil, using a 4-band inverted vee antenna and have not observed any other problem. It seems to work allright an all bands, apart from the maximum power output problem. I am not capable of fixing it because I am not a builder. I will sell it for 1000 Euros + Shipping. Please respond off the list if you are interested. 73! de TA2RX Bekir Kemal Ataman, Ph. D. Assoc. Prof. of Archives, Records and Information Management Marmara University, Faculty of Engineering Department of Industrial Engineering Goztepe, Istanbul, Turkiye Tel: +90-216-342-0292 Ext. 225 ArchiMac BBS Sysop & Webmaster http://www.archimac.org/ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
