No it won't but not sure that is going to help you. What method are you using to tin the leads?
I as well as most others have had great success just burning the enamel off with solder and an iron. I keep a 40 watt iron hot and just keep feeding fresh solder to it with the winding lead on the iron. The enamel always melts and the impurities flow away. You need to get that coating removed 100%. Tell us a little more about your technique. Rich Kd0zv -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Al & Dianne Bruce Sent: Tuesday, March 06, 2007 6:46 AM To: [email protected] Subject: [Elecraft] Tororids I'm having trouble tinning my toroid leads. In spite of rigorous cleaning they just don't want to accept solder ( Kester 44 ). Will adding some paste flux interfere with electrical qualities of the leads ? _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
