I'm in the middle of building the KPA100 I bought last spring, and decided
it best to build the board as is, then install the upgrade parts. There
are only 16 of them, so it shouldn't add too much time. I built up to page
28 in the manual, and am now waiting for the upgrade kits to arrive. Also
ordered one for an older K2/100. GL.
73,
Mike Cizek W3MC
[EMAIL PROTECTED]
FOC # 1739
HSC # 1849
----- Original Message -----
From: "LAMB, Dick and Judy" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, 18 March, 2007 22:10
Subject: [Elecraft] KPA100: Rev D manual to build Rev C kit?
I'm preparing to build a KPA100 from an old kit. My board is marked Rev
B, and my manual is Rev C (with Dec 14, 2004 errata sheet). My manual
seems to include all mods from the KPA100 Shield Upgrade and the
KPA100MODKT. However, my manual does not include all of the changes from
the KPA100UPKT (Oct 21, 2006) Upgrade Instructions. I'm finding that
integrating these instructions into my manual is very tedious and I'm
concerned about making errors. Is there any reason I can't assemble from
the latest (Rev D) manual?
Thanks
Dick, K0KK
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
