Dick and all,
For those who do not want to list and purchase the parts individually,
those parts are included in KPA100UPKT.
73,
Don W3FPR
Lamb, Dick & Judy wrote:
On Apr 12, 2007, at 5:06 , Ron McMurray wrote:
bought mine in mar of 05, manual says rev. c.
what is the benefits of updating it and do i need to.
ron
I might add to Don's reply that if you decide to build according to the
Rev E manual, you'll need the following replacement parts:
Part Quant.
Item Ref
E530102 2 Cap. .0047 mF "472" 100V .25" LS C67, C80 in
KPA100
E530033 2 Cap. 1200 pf "6122" 630V polyprop C2A, C6D
E530262 2 Cap. .0047 mF "472" 250V .4" LS C64, C79
E530295 1 Cap. .22mF "u22J63" 63V .2" LS C31
E680001 2 Toroidal ind. T50-1 blue .5"
L16, RFC1
E500006 1 Resistor, 100k 1/4W R4
E500090 1 Resistor 22K
1/4W R40
E690006 2 RF Choke 15uH BRN-GRN-BLK RFC4, RFC5
In addition, you might want to purchase replacements for R19 and R20 if
the ones in your kit are blue rather than reddish brown. See Don's
email of March 4 regarding R19 and R20.
I had exactly your situation, and just completed assembly of my KPA100
with a Rev E manual using a kit of Rev C parts.
I had no problems, and the KPA100 worked perfectly in every respect when
I first fired it up.
I might add that the great folks at the Elecraft Parts Dept. sent my
parts on the same day I sent my email order.
Good luck.
Dick, K0KK
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
