Gil,
I am certain that mic *CAN* be made to work, but it will likely require
some re-wiring inside the mic housing itself. The Up/Dwn buttons and
the keyboard are probably decoded by detecting various voltage levels in
the original design - you would have to convert the Up/Dwn buttons to
simple switches to ground to make use of them with the K2. The
schematic will be a necessity to determine just what to do with it.
73,
Don W3FPR
Gil Gibbs wrote:
OMs;
I've been giving my old Alinco mike a jaundiced look lately, the
remaining part of a HTX-212 rig I got from Rad Shacque many years ago.
The prime question: does anyone have a short answer for me, if this
little electret mike, with up/dwn buttons, keyboard, PTT switch, will
work with my K2? I'm going to take a dare and see if that outfit will
even provide a schematic for the aged little thing, find out what might
or might not work, but I can also use some input from others who might
be a tad more experienced with "hybrid" parts that seem to look viable.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
