On my multi-trips to 6Y, 3D2 and C6 I've just wrapped it in foam and stuck it in the middle of a suitcase. The suitcase has ranged from a "hard" samsonite to on of those aircraft aluminum jobs. Never had a problems but ... Probably the biggest threat you rig has is from the TSA gestapo. They unwrap stuff and don't wrap it up well again. On the 3D2 trip a couple of years ago one of the guys had his TS50 taken out and dropped! Had to have been cause it arrived with the VFO know jammed in and a PC board busted. Probably the best deal is to put it in a pelican case with the pluck foam and maybe, just maybe, if you can make the hole such that it doesn't matter how the rig goes in, the TSA can put it back in the right hole. Problem with the pelican case if you are traveling overseas is that it is unusual enough to often garner customs inspections. For that reason I like just a plain suitcase.
73, Fred KE7X Fred Cady [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of David Fleming > Sent: Monday, April 30, 2007 6:48 PM > To: [email protected] > Subject: [Elecraft] How do you travel with the K2? > > It's mighty quite around here all of a sudden. > > I'll be taking the K2 with me and the family on vacation this summer. > I'm trying to come up with a good way to package the rig for the > flight. I've never traveled with a radio before. I'll be > taking the K2, > KAT100-1, MFJ-4225MV (I know, but it seems to be a fairly > decent little > power supply), headset/mic, bencher paddles, cables, wire, some tools, > etc. My first thought was to give everything a good bubble > wrapping and > put it all in a sturdy (hard shell) suitcase and be done with > it. But I > can't treat my K2 that way. I'm thinking the best solution (within > reason) would be to buy a Pelican 1650 with the pluck foam and make a > nice cubby hole in the foam for everything. Or I could put the K2 and > KAT in a much smaller case and take it carry-on and put > everything else > in a suitcase. Those Pelican cases are a bit pricey though. > How do ya'll > (yous guys) do it? > > -David W4SMT > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
