On May 18, 2007, at 5:25 AM, J F wrote:
Hi Brian,
Never have epoxied toroids, I can see one major
disadvantage using this method... You'd never be able
to rewind the same core. Epoxy is a real bear to
remove.
Agreed. OTOH, if I built a K2 I don't expect I would ever scrap it
for spare toroids.
I've used hot glue to keep toroids in place, a little
easier to remove if needed.
Think you're better off with nail polish or acrylic..
Good point. Thanks.
My problem is that I have a bias -- I used to live on a boat. I used
West System epoxy for just about every repair as the only two things
that would attack it are UV and fire. Salt water does nothing to it.
73 de Brian, WB6RQN
Brian Lloyd - brian HYPHEN wb6rqn AT lloyd DOT com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
