I thought someone had done this already but can only find AE5X's
suggestion that it could be done.
http://www.ae5x.com/kx1.html (near the bottom)
I bought six 14500 Lithium-Ion cells rated at 3.7-V each from
batteryspace.com and successfully installed them in my KX1. The battery
holders are originally wired in series; they must be wired in parallel
for this mod. I had problems making the cells touch the contacts in the
holders, so I had to put a blob of solder on each positive contact. This
requires some care to avoid melting the plastic. With the cells in place
I get more than 3 W out on all bands, 80-20 M.
Charging the batteries requires some care as they can do nasty things if
overheated. Because I'm going to travel in Europe starting next week, a
homemade supply was out. I needed something that would pass muster at
the airport. I bought a charger designed for three cells in series, and
good for 1 A. It's a 12.6-V switching supply with unfiltered dc output.
The advantage for me is two-fold. It looks commercial, so the inspectors
shouldn't be alarmed at the sight of it; and it also operates on 100-240
Vac, so I can use it in Europe. BTW, the charger comes with the
clip-lead accessory. You can download a datasheet for these cells at
batteryspace.com, study it, and surely build a safe charging supply.
Maximum charging current is 750 mA; limit voltage to 4.2 V per cell.
Jim, KR1S
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
