Tim,
Even when the KAT2 is attached, you can still hear signals through the
base K2 antenna jack - that is NOT a problem.
If you cannot receive through the ANT1 or ANT2 jacks on the KAT2, the
problem must be with the KAT2. Since I presume it worked before, look
for the easy things first, like a break in the input coax or improper
seating of the crimp pins in the connector.
If you set the menu to ATU CALP, you should be able to make a continuity
check from the input coax center conductor to the center conductor of
ANT1 or ANT2.
73,
Don W3FPR
Ellam, Timothy St. J. wrote:
I have a problem which I am sure is my own error, but for the life of me I cannot seem to find the fix. I just switched the K2/100 module with regular K2 cover which has the K2ATU. The menu shows ATU as "auto", but neither Ant jacks 1 or 2 seem to function, The regular BNC that is not connected to the ATU works fine. I thought once the ATU was installed that jack was disabled? Am I missing a menu change or do I have a more substantive problem?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
