I was able to seat U1 all the way finally after checking all the pin depths with a clipped lead.
The menu options are still messed up. Somethings look fine, the freq numbers are counting ok, it displays E09 and E10 ok(tried resetting the chip but powering on holding menu and band) but some of the options are still not looking right. Something is wrong somewhere. Is there something besides the U1 MCU that effects the display of certain menu options? If needed I can note exactly which menu choices and how they look, maybe take pictures if needed. Any help would be appreciated, the MCU U1 is seated all the way now. thanks, -Chris --- Koaps <[EMAIL PROTECTED]> wrote: > So I was able to set U1 lower in the socket, it > looks > like its deeper on one side then the other. > > I did a power on test and there was no smoke, I saw > E10 and Batt Lo, and the numbers on the display > changing when I move the encoder dial, but in the > menu > there's some things not right. > > I can see some menu choices are correct, like > Led(spelled LEd), I was able to set batt to a lower > voltage ok, I'm using the 6 cells at 9v so I set it > to > 8v. > > Some of the menus where not displayed right, missing > bars or just plan wrong looking, things like > STL/STP, > would be S-L S-P, the T-R was totally incorrect, > ATU, > RCL and others were not correct. > > I don't know if I'm having a seating issue still, > damaged U1 or if something else is wrong, like a > poor > connect on one of the resister packs. > > I will check the connections again but any help > would > be greatly appreciated. > > Thanks, > -Chris > > > --- Koaps <[EMAIL PROTECTED]> wrote: > > > I think I'm having a problem seating U1. > > > > It doesn't go down into the sock to the shoulders > on > > the pins, there's about 1/16" to go til it hits > that > > point. > > > > It feels all the way in, and is snug, I can pull > it > > out but it won't fall out. > > > > Not sure if there's something wrong or not and I > > don't > > want to apply any power til I'm sure. > > > > Thanks, > > -Chris > > > > > > > > > ____________________________________________________________________________________Fussy? > > Opinionated? Impossible to please? Perfect. Join > > Yahoo!'s user panel and lay it on us. > > > http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 > > > > > > _______________________________________________ > > Elecraft mailing list > > Post to: [email protected] > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > > > ____________________________________________________________________________________Luggage? > GPS? Comic books? > Check out fitting gifts for grads at Yahoo! Search > http://search.yahoo.com/search?fr=oni_on_mail&p=graduation+gifts&cs=bz > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ____________________________________________________________________________________ Park yourself in front of a world of choices in alternative vehicles. Visit the Yahoo! Auto Green Center. http://autos.yahoo.com/green_center/ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
