Hello all. I'm seeing a difference between the numbering diagram and the numbering on my potentiometer. I'm thinking I should follow the numbers. The sequence on the potentiometer shows 1 and 3 on the outsides, and 2 in the middle and pointing to the center of a resistor symbol. The manual illustration shows 3 and 2 on the outside and 1 in the middle. Both show 3 next to the knob shaft. The manual also notes that "Your potentiometer MAY be either of the two types shown." (Emphasis added). I have three in-line lugs.
>From the front panel schematic in Appendix B, I think I just need to match the diagram on the pot with the schematic, but it is not clear which, 1 or 3, is the ground on the pot. The schematic on the pot indicates that CW moves towards 3. Thinking that this is simply a variable resistor, I'm thinking that getting the "variable" right is the key. Trying to learn as I go. Thanks for any help. NU6T Rich _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
