hi David, On 30 May 2007 at 22:27, David Woolley wrote:
> > What normally happens is that you blow the auxbus, and end up with a > > dead radio. Since yours still works, you probably got away with it. > > Perhaps there was nothing connected to that pin on your cable. > > That sounds like an accident waiting to happen! >From Don I got the advice to key the female DB9 connector at Pin 4 - not used on the K2. (I put a short piece of thin plastic into the hole and fixed it with super glue) That's what I did. I had to remove Pin 4 on the male DB9 serial cable with only Pin 2,3 and 5 wired. By the way, tonight the serial com2 on my PC died - that's worse because there is no chance to repair the mainboard. (this was just coincidental, I did not connect anything wrong to this comport.) 73! de Werner OE9FWV -- Money isn't the root of all evil. LACK of money is. PGP-Key: <http://www.qsl.net/oe9fwv/furlan.asc> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
